Buy Trane AC in Garland, TX – FREE Install + Transparent Pricing

Best HVAC Systems & Services for You | HVAC Services Pro

We all feel it when July pushes Garland, TX, above 95°F. We also feel the worry that comes with choosing the wrong air-conditioning contractor. At HVAC Services Pro, we remove that worry. We publish real prices, bundle the labor into a “free install,” and back every Trane system with a 10-year parts guarantee. In this guide, we show exactly what we do, what we charge, and how we keep your house cool for the long run.

Buy Now Schedule Online

Why We Trust Trane

Tested for Texas-Level Toughness

We lean on Trane because the brand leans on lab testing. 16 weeks of nonstop compressor abuse that equals ten Texas summers. Those tests let Trane offer a 10-year Registered Limited Warranty on all major parts when the unit is registered within 60 days.

Efficient, Reliable Lineup

Our product line starts with the steady XR14 and tops out with the whisper-quiet XV20i. Variable-speed models such as the XV18 deliver up to 18 SEER2 efficiency. It keeps energy use low and indoor humidity under control. We sell Trane because fewer breakdowns make our own warranty risks lower.

Built for Garland’s Climate

We also see Trane hold steady in Garland’s sticky climate. July highs average 94 to 96°F, and the heat index often tips 113°F. A weaker coil would fail early here. Trane does not, and that reliability lets us promise fixed prices with confidence.

How Our Offer Beats Local Norms

Most Garland HVAC sites promise transparent pricing. Yet some top-ranked competitors still require a phone call before they reveal even a ballpark figure. We publish our ranges below, send an itemized quote the same day we visit, and lock that number for 30 days. No “call for details,” no bait-and-switch rebates later.

Our Products and Transparent Pricing

We carry three high-performance Trane product lines for residential installations, each available in sizes ranging from 2 to 5 tons. These systems are a great fit for a typical 2,000 ft² home in Garland with existing, functional ductwork. All prices include:

Removal and haul-away of your old unit
Crane service (if needed)
Local permits
A new smart thermostat

Trane XR14

Available Sizes: 2 to 5 tons
SEER2 Rating: 14.8
Installed Price Range: $7,000 to $10,000

Trane XV18

Available Sizes: 2 to 5 tons
SEER2 Rating: Up to 18
Installed Price Range: $11,500 to $16,500

Trane XV20i

Available Sizes: 3 to 5 tons
SEER2 Rating: Up to 21.5
Installed Price Range: $14,800 to $19,800

Your final quote may vary slightly depending on electrical upgrades, concrete slab work, or duct repairs. We make sure every added cost appears as its own line item; no surprises. We publish these pricing ranges because homeowners deserve real numbers before a salesperson ever visits.

Call to Schedule Schedule Online

What “Free Installation” Means to Us

Many ads shout “free install,” but bury labor in the fine print. We spell ours out:

Labor

Two technicians remove the old condenser and air handler, set the new pad, hook up refrigerant lines, pressure-test, evacuate, and charge.

Materials

Pad, whip, disconnect, vibration isolators, float switch, and up to 15 ft of condensate re-pitch.

Permits and Disposal

We pay the City of Garland permit fee and reclaim refrigerant under EPA rules.

First-Year Tune-Up

One maintenance visit at month 11 to keep the Trane warranty intact.

Because labor and materials ride inside the equipment price, we can say “free install” without gimmicks. If you are not satisfied with our installation or our products, we offer a readdressing and refunding policy if you find issues within 7 days of purchase.

How We Tailor Each System to Garland’s Climate

Garland’s humid-subtropical profile piles moisture on top of heat. Oversized units short cycle, whereas undersized ones run nonstop. We avoid both by performing a Manual J load calculation in your living room, not from a desk. The U.S. Department of Energy calls Manual J the right way to size equipment, warning that rule-of-thumb tonnage can waste money and comfort.

We will hand you the worksheet along with your quote. So, you can see why a particular unit matched your windows and insulation better than a guess unit.

Efficiency Gains You Can Measure

A 15-year-old 10 SEER air conditioner can burn 2,400 kWh each cooling season in North Texas. Moving from 10 SEER to 15 SEER can trim the cooling part of your bill by about 35%, up to $35 in savings for every $100 you now spend. Step up to an 18 SEER2 XV18 and the savings climb closer to 40%. Garland rates average 14₵ / kWh. So, many customers recoup the upgrade premium in five to seven years, even before rebates.

Call to Schedule Schedule Online

Financing, Rebates, and Credits: Our Help, Your Savings

Here’s how we, HVAC Services Pro, designed our financing and other options to save you a good amount:

Utility Bill Credits

Garland Power and Light pays up to $1,400 when you replace a system with one rated ≥ 15.3 SEER2. We fill out the forms; you mail them with a copy of our invoice.

0% APR for 18 Months

We offer same-as-cash financing. Your quote lists both the cash price and the monthly payment, with no deferred-interest traps.

Federal Clean Energy Credit

Qualifying heat pumps earn a 30% IRS credit (capped at $2,000). We include the filled Form 5695 in your close-out packet.

Our admin team handles every incentive application. So, you don’t have to chase signatures later.

Call to Schedule Schedule Online

Our Step-by-Step Process

Every homeowner asks, “How long will this take?” Here’s our real timeline:

Booking Call

You choose a 30-minute arrival window.

Home Assessment (Day 1)

Manual J, duct check, static pressure, photos; 60 to 90 minutes.

Same-Day Quote (by 6 p.m.)

E-signature ready, itemized, with financing options.

Permits & Equipment Order (Day 2)

We file permits online and reserve your Trane serial number.

Installation (Day 5–7 typical)

One-day swap; we register your warranty on Trane’s portal before leaving.

Final Walk-Through

We confirm thermostat schedules and airflow in every room.

Follow-Up Call (Day 30)

We verify comfort and schedule a free tune-up.

If any stage slips, we text and email you immediately. So, you’re never left guessing.

After-Sale Care: Our 10-Year Commitment

Every Trane system we install carries the 10-year Registered Limited Warranty on parts. We match that with our own Labor Shield of ten full years of labor coverage. If a covered part fails, you pay nothing. Move within the decade? The Trane parts warranty transfers for a one-time $99 fee, and our Labor Shield transfers free as long as you notify us within 30 days of closing. One call still handles everything.

Final Thoughts

We design, install, and maintain Trane systems that beat the Texas heat without beating up your wallet. Our offer wraps equipment, labor, permits, and first-year service into one flat number. Our services stretch far beyond installation, covering annual maintenance and 24-hour repairs for a full decade. Our products span from value-driven XR14 units to XV20i flagships, each built and backed to run for years. If predictable costs and reliable comfort sound right, schedule for an assessment or call HVAC Services Pro today.

Call to Schedule Schedule Online

FAQs

Yes. The only change order we allow is for hidden code violations discovered mid-install. We show photos and get written approval before adding cost.

Not always. We price a cooling-only swap and a dual-fuel upgrade side by side so you can decide.

Sure. If it’s compatible, we program it at no charge.

Call our 24-hour emergency line. Because we only install Trane, every tech carries common Trane parts.

With the included tune-ups, we see 15 to 20 years of life on XR14 units in Garland’s climate.